Fast shipping
We ship with FedEx Express and by freight forwarding with a scheduled appointment.
Shopping cart
Your cart is empty.
Gift vouchers and coupons can be redeemed in the next step.

A winter camp at a LARP or reenactment event has a special atmosphere – a campfire in the snow, steaming breath, the smell of wood smoke. Those who have participated in a well-prepared winter camp once will not want to miss the experience. Those who go to a winter camp unprepared will freeze, not sleep, and find their tent damp and stiff in the morning.
Generally, yes – with limitations. Cotton tents are designed for cool and changeable weather and are much more robust than many synthetic tents. Cotton provides passive insulation, but allows moisture to pass through the fibers, which reduces condensation. This makes them better suited for autumn and winter use than synthetics.
What cotton tents cannot do: permanently withstand snow loads. Pole tents are not designed to have static weight on the roof – neither the poles nor the seams are designed for this. This is the crucial point for all winter camp plans.
Suitable for winter use:
Saxon tent: Flat roof sheds snow well, simple tensioning
Knight's tent: Plenty of interior space for a tent stove, but watch the wide roof area
Single-mast tent: Steep conical roof, snow slides off – the most winter-proof design
With more attention:
Large knight's tents (5x9 m and larger): wide horizontal roof area collects snow; check more frequently
The location determines comfort and safety more than any heating system.
Wind protection is a priority. A natural barrier – a group of trees, a slope, a wall – significantly reduces heat loss in the tent and reduces the tensioning load. The wind is the biggest heat thief in winter.
No trees with snow on the branches directly above the tent. Branches break under snow load – this is not uncommon, but a known risk at winter events. Minimum distance to the branch area: at least one tree height.
Elevated, well-draining ground. Meltwater seeks the lowest point. A slightly elevated, firm ground keeps the inside of the tent drier than a flat meadow where meltwater collects.
Not in the lee of fire pits of other groups.
If it snows: knock the roof from the inside regularly
Do not completely close the ventilation opening even in the cold
Check the tension of the pegs daily for temperature changes
Never leave the stove unattended and do not burn it while sleeping
After dismantling:
If the tent is dismantled when wet: pack it temporarily for transport
At the latest 24 hours later, completely unfold and dry in a well-ventilated place – even indoors if necessary
Store poles, pegs and ropes separately and dry
If necessary, re-impregnate
A winter camp with a medieval tent is not witchcraft – but it requires more preparation than a summer camp. The three crucial points are: a wind-sheltered location, adequate ventilation when heating, and consistent drying after dismantling. Those who follow this will have one of the most atmospheric experiences that LARP and reenactment have to offer.
Questions about the right tent for your next winter camp? Write to us – we will help you find the right model.
Grundsätzlich ja. Baumwolle isoliert passiv und leitet Feuchtigkeit durch die Fasern ab, was Kondensation besser reduziert als Synthetik. Was Baumwollzelte nicht können: Schneelast dauerhaft tragen. Bei anhaltendem Schneefall muss die Dachplane regelmäßig freigehalten werden.
Das Einmastzelt hat durch sein steiles Kegeldach den größten Vorteil – Schnee rutscht von selbst ab, ohne dass man eingreifen muss. Sachsenzelte leiten Schnee ebenfalls gut ab. Bei großen Ritterzelten (ab 5×9 m) muss die breite Dachfläche bei Schneefall besonders häufig kontrolliert werden.
Ein holzbetriebener Zeltofen ist die effizienteste und stimmungsvollste Lösung für Zelte ab ca. 3×5 m Grundfläche. Dabei sind zwei Dinge unverzichtbar: eine fachgerechte Ofenrohr-Durchführung (kein direkter Kontakt mit der Plane) und eine dauerhaft geöffnete Lüftungsöffnung zum Schutz vor Kohlenmonoxid. Vor dem Event immer prüfen, ob der Veranstalter Zeltöfen erlaubt.
Das ist Kondensation – keine undichte Plane. Warme Atemluft trifft auf die kalte Zeltwand und schlägt sich als Feuchtigkeit nieder. Abhilfe: immer eine kleine Lüftungsöffnung offen lassen, einen Zeltofen nutzen (erzeugt trockene Wärme) und den Schlafsack nicht direkt an die Zeltwand lehnen.
Stangenzelte sind nicht für statische Schneelast ausgelegt. Nasser, sich setzender Schnee kann Nähte, Stangen und Ösen beschädigen. Bei anhaltendem Schneefall die Dachplane alle ein bis zwei Stunden von innen leicht anstoßen, damit der Schnee abrutscht. Bei Schneesturm ist Abbauen immer die sicherere Entscheidung.
Das Zelt muss vor der Einlagerung vollständig trocken sein – auch an Nähten und Kanten. Ein feucht eingelagertes Winterzelt schimmelt schneller als jedes Sommerzelt, weil die Temperaturschwankungen beim Transport Kondensation fördern. Spätestens 24 Stunden nach dem Abbau vollständig entfalten und an einem belüfteten Ort trocknen lassen.